Sagem satellite itsd81 HD does not seem to work

2012 · 6 replies · Devices

This discussion is 14 years old. It predates today's Roomie Remote X, and the app names, menus, features, pricing, and device details below have changed substantially since 2012. Treat it as historical reference — see Support and current compatibility for how things work today.

In short

To confirm, have you walked through the FAQ with the Sagem: In particular have you tried a higher Retransmit Count? Also — Staff replied: “One thing to check is whether the box is set to some kind of RF mode. It may not even be listening to IR commands.”

Roomie Staff 2012-11 · older version

To confirm, have you walked through the FAQ with the Sagem:

roomieremote.com/faq/#diagnoseIR

In particular have you tried a higher Retransmit Count? Also, to be sure it's not some variant model, we'd recommend trying all similar command sets which include:

Sagem: DTR/PVR Series Terrestrial: Set Top Box

Sagem: ITSD Series: Satellite

Sagem: ICD Series: Cable

Sagem: ITSD81HD: Satellite

Thank you.

Member 2012-11 · older version

Hi.

Using the blaster (blaster works from the same sofa position for the samsung tv as does the old original sagem remote for the sagem):

I have tried with the itsd81hd satellite and with the cable - all retransmit counts (1,2,3,4,5).

I tried with itsd series as well. These I have tried with the default

will try the settop box.

Tried also with the emitter with satellite hd settings mentioned above.

Went thru the mentioned diagnoseIR FAQ before contacting you.

I must be doing something wrong still but cannot figure out what it is... What should I try next? The satellite box is the most important device to be able to remote control...

--h

Roomie Staff 2012-11 · older version

One thing to check is whether the box is set to some kind of RF mode. It may not even be listening to IR commands. That would also explain why you couldn't learn the remote.

Member 2012-11 · older version

There is no RF mode in the device.

The plain old Sagem remote (and the Harmony One remote) work with Sagem box (they are both normal IR remotes).

iTach does not work.

Seems like iTach is not sending right codes to Sagem...

How to proceed?

 

Roomie Staff 2012-11 · older version

The normal way to proceed is to learn the IR commands if the built-in codes do not work with that model:

roomieremote.com/faq/#learnir

Member 2012-11 · older version

Hmm. i tried to make the iTach to learn (mentioned that as point 2. ) at the start of the thread. Must be doing sthing wring as it does not learn...

How to proceed...

Member 2012-11 · older version

Hmm. Finally the Sagem set top box code worked.

← PreviousMCE Controller config files Next →Pioneer PDP-427XA and NAD T763

Related threads

Today's Roomie controls 400,000+ devices.

Roomie Remote X brings TVs, receivers, streamers, lights, and whole-home audio into one app on iPhone, iPad, Mac, and Apple TV.

Download Roomie Remote X