iTach via Manual IP/Port without network discovery

2013 · 1 reply · Configuration

This discussion is 13 years old. It predates today's Roomie Remote X, and the app names, menus, features, pricing, and device details below have changed substantially since 2013. Treat it as historical reference — see Support and current compatibility for how things work today.

In short

I have an advanced network where network discovery is not possible due to vLAN and VPNs and what not. — Staff replied: “Adding IR devices on the iTach can be done manually. Just tap Add Device, then 'Manual IP', enter the IP address of your iTach and then use port 4998.”

Question 2013-07 · older version

I have an advanced network where network discovery is not possible due to vLAN and VPNs and what not. I need to configure the iTach to RoomieRemote via a static ip and port. I can add the device in but it appears only to control the ir ports open/close. Not sure how to add in the other IR devices. Thanks.

 

Brad

Roomie Staff 2013-07 · older version

Adding IR devices on the iTach can be done manually. Just tap Add Device, then 'Manual IP', enter the IP address of your iTach and then use port 4998. Roomie will automatically figure what's going on and ask you the details for the infrared device.

Thank you.

← PreviousDirectv C-41 client Next →Recommended Home Theater Systems

Related threads

Today's Roomie controls 400,000+ devices.

Roomie Remote X brings TVs, receivers, streamers, lights, and whole-home audio into one app on iPhone, iPad, Mac, and Apple TV.

Download Roomie Remote X